WPC Club, Inc.
Dodge, Fargo, DeSoto, Chrysler, Imperial, Maxwell, Chalmers,
Jeep and Eagle & related
All Mopar /
All Years / All Models
We now have our complete listing of the Classified Ads ( 8-10
pages ) from our magazine, the WPC News available on line.
There are hundreds of ads for cars, parts, services,
literature etc. that are not listed on this page.
These ads are available to Non Club Members
for a small fee, payable on line. For more
information click here to access
the classified ads.
The following is a list of
WPC Club members and other suppliers who reproduce some of those hard
to find parts for
many of our Chrysler Products. The Club itself is not
a manufacturer of parts, and as such the WPC Club INC. and its board
members cannot take responsibility with any dealings made with these
suppliers either on a personal or business level.
1957-1959 Power Windows plastic connectors
Very nice and accurate reproduction
of original Power Windows plastic connectors, for both master switch
and single switches. Limited production made by batches, so it can
take time to fulfill your order.
master switch connector is $33.00, the single switch connector is
$9.00. A full set (1 master and 3 singles) is $60.00. Shipping from
Europe, worlwide at a $8.00 flat rate up to 2 full sets. Contact me
Hampton Coach Interiors, by LeBaron Bonney, has recently expanded Dodge restoration interiors to include 1936 4-Door Sedan, 1962 Polara 500 4-Door, and 1962 Dart 4-Door. Hampton Coach national award winning restoration interiors come complete with all necessary parts and hardware, and are ready to install. Precision made using original interior patterns, and correct original type fabrics. Proper fit reduces installation labor time, and facilitates correct
installation. Since 1960, LeBaron Bonney has been known as the go to source for high quality restoration interiors. For more information please contact us at email@example.com, or call 800-221-5408.
KP USA Bilar - Reproduction parts for
1955-1962 Forward Look Mopars. Oval air filters, glass
run channels, emblems, generator tags, pressure hoses, starter
solenoids, rubber parts - gaskets, weather strip, gas &
brake pedals, sway bar bushings, seat track covers , swivel seat
pivot bracket covers, washer bags, lenses, decals, and more.
http://www.kpusabil.se/ Once there, click
on the English link This is a Swedish Mopar site.
SMS Auto Classics - for A,B and E Body
Mopar Parts ( DO not confuse us with SMS Auto Fabrics )
Visit our web
Waldron's Antique Exhaust has been
providing exhaust systems and components to automobile restorers and
enthusiasts since 1960. We offer systems for most Chrysler, Dodge,
Jeep, Plymouth and DeSoto vehicles built between 1914 and the late
1980's. Our systems are available in aluminized steel or T409
stainless and even include reproductions of the 1960-62 Ram
Induction exhaust systems for Chrysler, Dodge, Plymouth or DeSoto.
You can check us out at:
Club members can call toll free (US only) to order (800) 503-9428 or
The Brassworks - Reproduction Radiators
The Brassworks restores and reproduces radiators for antique &
classic cars. We have quite a few early Chrysler radiators &
drawings to pattern from in our archive. Please contact us about
500 Linne Road Unit I Paso Robles, CA 93446 (805) 239-2501
Precision Rubber / Running Board
Reproduction Rubber My name is Pat Rowden, the original owner
operator of Precision Rubber. During the seven years I owed
the business we reproduced over 500 sets of running board mats for
vintage vehicles with customers worldwide. I sold the business 6
years ago. Sadly the person I sold the business tarnish the
reputation of the business by failing to meet his obligations to
several customers, and ultimately declared bankruptcy.
Kris Arneson has now taken over the ownership of the business. Kris
has been doing complete frame up restorations of vintage vehicles
for over 30 years. As you realize complete frame up restorations
can take from one to two years to complete. As Kris was looking for
a restoration business with a shorter time frame he decided to
purchase the tools and equipment of my business from the receiver.
Kris has asked me to help him reestablish the good will and
reputation of the business. As vintage vehicle restoration is Kris
Arneson's passion I feel very confident he will turn out a
show-stopping quality product each and every time. For this reason
I am more than willing to help him reestablish the business that I
loved. As a starting point I have built a website for Kris
to showcase the business. The address is:
www.runningboardrubber.com I would
encourage you to spend a few minutes browsing it. If you
have any questions or concerns please feel free to email me at:
firstname.lastname@example.org or contact me by phone at: 1 (403) 335-8644
between 9:00 am and 7:30 pm Mountain time.
1956 Door Sill Plates for Chrysler, Imperial, and DeSoto -2
Door and convertible model owners. (Four door owners see below).
Quality die stamped aluminum sill plates, NOS factory-correct in
every detail, will be available April 2008. For Chrysler and
Imperials, a complete 2 door set for $399 plus S/H includes one left
and one right door sill plate plus two sill-to-seat “trapezoid
shaped” fillers (fillers highly recommended for matching appearance
to door sills). Imperial Owners will need only to transfer
separate “Imperial” script to the new filler pieces. DeSoto owners
may want to reuse sill-to-seat filler piece stamped “DESOTO”,
therefore, one left and one right door sill set (without fillers)
may be purchased for $379 plus S/H. Four door owners may purchase
two sill-to-seat filler pieces separately for $ 69 per pair plus
S/H. (No singles sold). Correct phillips truss head SS screws
included. Do not miss this only opportunity to acquire these
concours quality, NOS replacements for dented, scuffed, and corroded
door sill plates. Strictly limited availability and these will not
be available after this stamping is sold out. Do not procrastinate
and miss out! Please include name, address, make, model, and
quantities. Reserve your sets on first come first reserve basis by
CoteJohnR@aol.com John R. Cote, WPC#5921, 2000 Little
Meadow Rd., Guilford, CT. 06437.Phone (203) 457-1200 or cell (203)
click on photos to see larger
and housings with LED bulbs.
Mopar Mel -
supply you with the following new reproduction parts plus more in
for more information or visit
Headliners -- 1957 to 1961 Dodge and Plymouth cardboard headliners
Weather striping -- 1957 to 1961 Dodge and Plymouth (almost all
MPH speedometer for 1957-1958 Plymouth
Christine interior kits
Trunk liner kits for 1957-1961 Mopars
Front and rear radio speakers for 1957-1961 Mopars
Firewall insulation pads
Block motor mounts for 57-59 finned Mopars
Custom tuck rolled trunk kits
Headliner plastic retainer strips 57-middle 60’s
Chrysler 300 air cleaners again available. Both round and
oval styles to fit 58 thru 64 dual 4 bbl cars. Cleaners are steel as
original and painted correct colors with correct decals, ready to bolt
on. Priced at $675 per pair. Call Mike Burke at 517 869 2651 or email: C300F@hotmail.com (05/11/07) Click
on thumbnail for more photos.
note - this seems to be a good price - we saw a set on Ebay Oct /07
from a vintage Mopar dealer ( we won't say who they are but they are
well known for what many consider as very overpriced items ) and their "buy it now
price" was over $1200.00 for an NOS set
of these which were extremely shelf worn. Remember all the costs
involved in tooling up to produce these beautiful reproductions -
it's not cheap to do.
Axion Battery Products,
INC for Mopar Group 27 and 27 Reprouction Batteries Our
AGM Series line of sealed, maintanence free batteries utilize Absorbent
Glass Mat VRLA technology making them leakproof and spillproof. They’re
shipped fully charged and ready to go right out of the box. No more
maintenance and no more acid mess! Visit us at
Chrysler Imperial (and
other C-body Chryslers) Budd Brake Rotors for 1967-1969 - $179
Brand new rotors manufactured to OEM specifications.
B-Body Bendix Brake Rotors for
1966-1969 - $169 each.
Contact: Shaun Shroff @ DuraBrake Phone: 650-210-9315 x109, FAX 650-210-9311, email: email@example.com
tops for all
Chrysler products from 1935 to date. Available in Haartz,
Stayfast or vinyl. Highest quality made car covers, carpet material,
upholstery fabrics. Largest leather selection in the US. Can make or
match any color, minimum 1 hide. Bill Hirsch, WPC#256, 396 Littleton
Ave, Newark, NJ 07103, 800-828-2061 email: firstname.lastname@example.org
Brown floor mats, correct
pattern reproduction for 1937-40 Plymouth and some 1941 models.
May also fit Dodge & DeSoto models of same years. $210 each plus
$20 S&H. William Knudsen, WPC#4388, 402 Forest St, Wyandotte, MI
Hogshair carpet, the
original style Chrysler Corp carpet now available in black,
brown & gray in 48" width and maroon and blue in 40" width. Please
call for samples and prices. Bill Hirsch, WPC#256, 396 Littleton Ave,
Newark, NJ 07103, 800-828-2061, email@example.com
Wheel trim rings,
stainless steel 15", 16" $30 ea, chrome $60 ea, 17" chrome only
$60 ea. Optima batteries 6 & 12 volt, world's finest battery uses
no water, no corrosion, 5yr warranty. Lowest prices in USA. Bill
Hirsch, WPC#256, 396 Littleton Ave, Newark, NJ 07103, 800-828-2061,
Gas tank strap sleeve nuts
(Mopar #855646): Used on all Chrysler products from
1940 trough 1948. These are machined from solid stainless steel stock
and come with a new stainless steel external tooth lock washer. $35 per
pair, shipping included. Bill Haire, WPC#11173, 1624 S 96th St, Omaha,
NE 68124, firstname.lastname@example.org
10 W non-detergent oil for
Chrysler fluid-drive transmissions,
2 quarts for $25 and 4 quarts for $45 (includes shipping).
Hammertone paint for the under the
dash heaters. It is $25 per 12 oz. aerosol can. And I sell the
red paint for the Town and Country script on the rear
bumper on T&C's for $15. Both of the prices include shipping.
Bob Solheim, WPC#8915, 373 Glen Eagles Way, Simi Valley, CA 93065, 805-587-1931
Kelsey Hayes (master
cylinder with power brake booster) rebuild kits. Fits only 1955.
Includes large diaphragm. Impossible to find until now. Newly
manufactured rubber parts. SASE. Jim Fredrick, WPC#663, 918 W Co. Rd C
2, Roseville, MN 55113, 651-484-1184, email@example.com
Antennas: NOS and New, REARS;
Any 1956 $375 pr (state make). 1957-59 Dodge, Plymouth $450 pr.
1961 Chrysler, DeSoto $250 pr. FRONTS: NOS and NEW 1955-67 all $135 ea.
Antenna masts $50 ea. Satisfaction guaranteed. Dennis Turner, WPC#9728,
5145 SE 106th Ln, Belleview, FL 34420, 352-245-8346, email:
I rebuild and re-key vintage automotive lock cylinders. I
also have most standard reproduction ILCO key blanks in stock
for most vintage Chrysler Products. I've been a
locksmith since 1972 and know what I'm doing. You send
me the lock cylinders, I will have them done and back in the
mail within 2-3 business days of receiving them. Ian
Smale, WPC member #2329 since 1977. I am also the
webmaster for the WPC Club. My company is
Acme Safe Ltd,
Locksmiths. I can be reached through the web
site email link
phone me at the shop at 250-383-6899 Pacific Time 9:00 AM until
AXLE SEALS, REAR OUTER,
REPRODUCED from billet stock with modern Nitrile sealing
compound. IN STOCK: Chrysler 1930 66, CJ, 1930 CD, 1931 CM, 1931 CD,
1932 CI, 1932 CP, 1933 CT and CO. IN STOCK: DeSoto 1928-29 K, 1930 CK,
1931-32 SA, SC, 1931-32 CF. IN STOCK: Dodge 1930 DD, 1930 DC, 1931 DH,
1931 DC, DG, 1932 DL, 1932 DK. IN STOCK: Plymouth 1928-29 Q, U, 1930
30U, 1931-32 PA and PB. All stock seals are made for the original rear
ends and hubs, please know for sure before ordering what you have. Each
of the stock seals ordered are $55 each and comes with a gasket,
instructions, handling and shipping. Other years, makes, and models
would be available on a made to order basis with a slightly higher
price per seal. PLEASE send a US Postal money order to: Larry
Chegwidden, WPC#1082, 6826 SE Stark St, Portland, OR 97215, If calling
always leave a message. Best to call after 7 PM Pacific Time
New windshields for 57-64 MoPar hardtops and convertibles.
OE quality reproductions with
correct bubble, tint, and fit, not South American made. Prices from
$500. Other makes, models, and "tailor made" jobs available on
special order. For more info call
687 6579 or FAX 951-687-5963. Timo
Tanskanen, WPC#7129, 5885 Jurupa Ave #G, Riverside, CA 92504
New! Reproduction trim
parts: Chrysler, DeSoto, Dodge, Plymouth, Imperial, Dart, Valiant.
Hood and trunk script, letters, emblems, bezels, ornaments. Mostly
55-68. Just about all weatherstrips and small rubber parts for all
Chrysler products, 55-70. Trunk panels, trunk carpets, glove boxes,
firewall pads, jack instructions, decals, much more. Catalog #10 $3 or SASE for update sheet.
WPC#4463, 37 Amdahl Ln, Kalispell,
download catalog Please Read:
Personal Message from Gary Goers.
pipes, mufflers, tailpipes, most MoPars from 1914 to date.
Aluminized steel, type 409 stainless, sorry no muscle car or V8 "Y"
pipes! Since 1966! Jim Fortin, (dba Talermade), WPC#7510, 95 Weston St,
Brockton, MA 02301-3334, 508-586-4855 12N-12PM, firstname.lastname@example.org
Chrysler engine enamels: 1962-83
Chrysler red, Chrysler blue, Chrysler Hemi orange, Chrysler Turquoise.
Very high temp. Will not burn off. Quarts $31, aerosols $13. Shipping
additional. Bill Hirsch, WPC#256, 396 Littleton Ave, Newark, NJ 07103,
Check out our new online store for Chrysler product cars. New
parts added weekly! Extensive selection of NOS and nice used parts for
Chrysler product automobiles. Also reproducing long ram induction
parts. Jeff Carter, WPC#6600, JC Auto Restoration, Inc, 20815 52nd Ave
W #2, Lynnwood, WA 98035, 425-672-8324, 425-771-2522 FAX, email:
email@example.com Serving the MoPar community since 1978.
Repair oil leaks on your
engine with fresh reproduction gaskets that fit (Prices have
changed from last issue). Valve Cover Gasket Sets: 1930-36
Chrysler/DeSoto 6 cyl $14 ea. 1933-59 Dodge/Plymouth 6 cyl $12 ea.
1937-68 Chrysler/DeSoto flathead 6 cyl including Canadian $12 ea.
1931-50 Chrysler/DeSoto straight 8 $14 ea. 1953-66 Dodge/Dodge
Hemi/Plymouth V8 $15 ea. 1953-58 Dodge/Chrysler hemi tube seal sets $20
ea. 1952-57 DeSoto Hemi V8 and 1955-58 Chrysler Poly V8 $18 ea. 1951-58
Dodge/Chrysler/Plymouth valley cover gaskets $12-15 ea. Oil Pan Gasket
sets: 1930-36 Chrysler/DeSoto 6 cyl $16 ea. 1933-59 Dodge/Plymouth 6
cyl $12 ea. 1937-68 Chrysler/DeSoto 6 cyl $14 ea. 1931-50
Chrysler/DeSoto straight 8 cyl $18 ea. 1951-56
Chrysler/DeSoto/Plymouth/Dodge Hemi V8 except 1952-57 DeSoto Hemi $14
ea. 1952-57 DeSoto Hemi $16 ea. Overhaul gasket sets with or w/o head
gaskets: 1929-32 Plymouth 4 cyl $170 ea, w/o head gasket $112 ea.
1930-36 Chrysler/DeSoto 6 cyl $182 ea, w/o head gasket $120 ea. 1933-34
Dodge/Plymouth 6 cyl $74 ea, w/o head gasket $56 ea. 1934-59
Dodge/Plymouth 6 cyl $68 ea, w/o head gasket $56 ea. 1937-54
Chrysler/DeSoto and 1937-60 Dodge truck 6 cyl $76 ea, w/o head gasket
$60 ea. 1951-68 Canadian Chrysler flathead 6 cyl and some trucks $82
ea, w/o head gasket $60 ea. 1955-58 Chrysler Poly and 1956-58
Dodge/Plymouth/DeSoto Poly V8 $126-$156 ea, w/o head gaskets $105-$130
ea. 1951-58 Dodge/Chrysler/DeSoto Hemi V8 $132-$170 ea, w/o head
gaskets $106-$142. 1956-66 Dodge V8 $88 ea, w/o head gaskets $68 ea.
Transmission gasket sets: 1933-34 Dodge, 1935-39 Mopar 6 cyl, 1935-37
Mopar 8, 1940-56 Mopar, 1940-41 Overdrive and 1957-60 Overdrive,
$12/set. Please specify year and engine size when ordering. NOS Victor,
McCord and Fitzgerald head and manifold gaskets also available. Please
inquire. Add $12 per overhaul set and multiple gaskets and $5 per
single gasket or trans set shipping in the USA. Other 1920s-60
mechanical and electrical parts all makes and models available such as
engine, ignition, switches, brake, suspension, fuel pumps, water pumps,
etc. Check, money order and major credit cards accepted for payment.
Robert Marx/Marx Parts WPC#12619, 7323 Country Trunk N, Arpin, WI
54410-9521, 715-652-2405, 715-652-2357 FAX, firstname.lastname@example.org
I reproduce dash knobs
& cables including Free wheeling for 1928-34 Chrysler
products and dash gauge labels too. Write or call for free brochure.
Floyd Carlstrom, WPC#648, 3151 CTH J, Verona, WI 53593, 608-845-7855,
1931-32 Chrysler all
models reproduction dash gauge labels exactly like originals, 7
labels per set for just $45/set postpaid. Set includes clock &
combination gas & oil label for the Imperial models. 31 is black on
white, 32 black on special silver & matches perfect. These are
die-cut complete with instructions. Beautify your dash authentically.
Floyd Carlstrom, WPC#648, 3151 CTH J, Verona, WI 53593-9085,
email@example.com Since 1966.
Dash knob labels for 1938
Plymouth $40 set. Black on silver. Floyd Carlstrom, WPC#648,
3151 County J, Verona, WI 53593, 608-845-7855,
firstname.lastname@example.org Since 1966.
GLOVE BOXES - Now
reproducing glove boxes for P15 Plymouth for only $75 postpaid.
Can also reproduce others with your old sample or dimensions. Carlstrom
Car Parts, WPC#648, 3151 CTH J, Verona, WI 53593-9085, 608-845-7855,
reproductions: Town & Country and non-woodie items not found
elsewhere. Newest part is for all Chrysler, Dodge, DeSoto convertibles
- upper door seal to body. Steel core as original. Free catalog. Vintage
Dennis Bickford, PO Box 1132 LaLuz NM
Am now reproducing dash
labels for 1946-1948 Chryslers. These are $35 postpaid for set
of five. Labels are die-cut, peel off stock with black printing on
special light silver exactly like originals. OR send me your original
knobs and I will remove the old facing, install new labels and put
clear facing over them for maximum protection and clarity for $100 set
postpaid in USA. IF you have old dull, dirty/cracked hard to read
faces, this is a great way to beautify your dash authentically. Please
allow 3-4 weeks for delivery. Floyd Carlstrom, WPC#648, 3151 CTH J,
Verona, WI 53593-9085, 608-845-7855, email@example.com
Now reproducing dash knobs
w/cables or labels only for Dodge & Plymouth Trucks
including Power Wagons. Call or write for details. Floyd Carlstrom,
WPC#648, 3151 County J, Verona, WI 53593, 608-845-7855,
Drive shafts for Plymouth,
Dodge, Chrysler & DeSoto. New shaft replaces old trunion type, bolts
in, no modifying. $395 and up, plus shipping.
Joe McGinnis WPC#3054, 2675
Deer Foot Rd., Blairsville GA 30512-6207 USA
DECODING: 1962-1974 Body
Code Plates (AKA Fender Tags) and Production Broadcast Sheets.
We also reproduce lost or rusty Body Code Plates (AKA Fender Tags),
Monroney Labels (AKA Window Stickers) 1966-68 Certicards. (Most
services not available in Michigan). Check out our web page with a
complete list of services and a little bit about me at
GTS-Galen V. Govier, WPC# 6437, 37260 Sand Burr Ln, Prairie du Chien,
WI 53821, 608-326-6346, 608-326-8061 FAX
Oil filter. Cast aluminum,
replaces old tin throwaway type that has a 1/8 NPT fitting at each end. 4 1/4"
diameter x 6" long. Unscrews to replace Neon filter inside. Will
work with any engine that filters just the bypassed oil. $165 plus
shipping. Joe McGinnis WPC#3054, 2675 Deer Foot Rd.,
Blairsville GA 30512-6207 USA 706-781-2805 firstname.lastname@example.org
1940 Chrysler Windsor speedo cluster front
glasses, set of 3 (big speedo, small pairs for oil, temp, gas +
amps). High quality mineral glass reproduction printed/coated
translucent from backside, $50/set + shipping. Matt N. Roehl, WPC
#13249, Postfach 100872, 33508 Bielefeld, Germany, email@example.com,
www.mopar-consult.com, phone +49-172-7835652
Painting From Your Photo
on Canvas...Turn your MOPAR into a work of art. Transform photos
or digital files into a textured effect painting. Call or email for
details 1-888-770-9595, firstname.lastname@example.org or go to our website
Barry Cleveland, WPC#13314, 7397 Gun Club Rd, New Tripoli, PA
Reproduction Truck Wood and Sheet Metal
should know some details about a person and company you deal
with. I've been interested in pickups and old trucks for years
and have a 1955 F-250, a 1940 Ford 1/2 ton, and a 1966 GMC
Fleetside. We have about 50 pickups in our "museum" yard to
enable us to make accurate patterns for your parts.
During the restoration-rodding of these vehicles, I realized a need for
replacement bed parts and accessories. I decided to manufacture
and sell pickup parts for the truck rod-restoration hobby. Our
facility has expanded to four times it original size, and we now have
eight people working to provide you with quality parts in a timely
manner. We have been serving customers nationwide since
1988, we realized the Big Three auto manufacturers weren't offering a
wood floor option any longer, so we developed the "Show Deck", a
hardwood and stainless floor overlay. This product allows the new
truck buyer to blend current technology with the classic look of the
of the many years of testing and research, we feel we can offer the
highest quality replacement parts on the market today. We are
developing replacement parts for Dodge
pickups, as well as items for Chevy-GMC and Ford. Our
customers include people restoring pickups -- pickups used every day
and all-out custom creations.